Set up curved text for the laser marking machine

1. Software Basic Settings

To achieve arc text effects with a laser marking machine, you first need to master the basic operations of the software:

Select the curve tool: Locate the text path function in the marking software

Adjust text orientation: Change the bending degree of the text by dragging control points

Preview the effect: View the 3D simulation in real time to ensure a natural arc

Save the template: Save commonly used arc parameters as preset values

2. Key Parameter Optimization

The precision of arc text depends on the reasonable matching of the following parameters:

Scanning speed: It is recommended to set it between 400-600mm/s

Filling spacing: 0.05-0.1mm can deliver clear edges

Power adjustment: Adjust according to material properties, increase by 15% for metal materials

Frequency control: The effect is ideal within the range of 20-50kHz

3. Practical Tips

These experiences can help you avoid common problems:

For complex arcs, it is recommended to mark in sections, with each section not exceeding 90 degrees

Font selection affects the effect, prioritize using sans-serif fonts

Conduct a sample test before marking to confirm the focal position

Clean the lens regularly to maintain beam quality

Would you like me to organize this English translation into a concise version directly usable for equipment operation? It will help you quickly reference and adjust settings.